Need help?Do you have a question about the Husqvarna 61 and is the answer not in the manual?
Explains symbols displayed on the chain saw itself.
Explains symbols used within the operator's manual for clarity.
Identifies and labels all parts of the chain saw.
Essential checks and advice before operating the chain saw for the first time.
Critical safety advice and the importance of common sense during operation.
Details required protective gear for safe operation of the chain saw.
Explains the safety mechanisms built into the chain saw and their functions.
Guidance on understanding and preventing kickback, plus details on safety controls.
Essential advice for safe operation and maintenance of the stop switch, muffler, and cutting equipment.
Information on guide bar features, saw chain types, and terminology for safe cutting.
Detailed instructions for sharpening cutting teeth and adjusting the depth gauge setting.
Procedures for adjusting the depth gauge and correctly tensioning the saw chain.
Instructions for proper lubrication of the chain, bar, and oil pump for optimal performance.
Guidance on checking wear on drive sprockets, cutting equipment, and lubricating bearings.
Step-by-step instructions for correctly fitting the guide bar and saw chain onto the machine.
Guidelines for correctly mixing petrol and two-stroke oil, including recommended ratios and quantities.
Safe practices for fueling the machine and guidelines for transport and long-term storage.
Procedures for starting a cold or warm engine, including the use of the choke and decompression valve.
Instructions for safely stopping the engine and general advice on handling the chain saw during operation.
Essential checks before use and fundamental safety rules for efficient and safe chain saw operation.
Techniques for safe handling, grip, and avoiding kickback during various cutting tasks.
Instructions on using full throttle, cutting strokes, and factors to consider before making a cut.
Methods for cutting logs safely, avoiding jams, and handling tension in branches.
Guidance on tree felling techniques, safe distances, and preparing a clear retreat path.
Detailed steps for making directional and felling cuts to control tree fall direction accurately.
Procedures and warnings for safely freeing a tree that has fallen improperly or become trapped.
Techniques for cutting wood under tension and detailed explanation of kickback causes and prevention.
Safe methods for limbing branches and cutting the main trunk into logs.
Instructions for adjusting the carburettor for optimal performance, including idle speed settings.
Guidance on adjusting the high speed jet and ensuring correct carburettor settings for smooth operation.
Procedures for checking the inertia brake release, brake trigger, and throttle trigger lockout functionality.
Inspections of the chain catcher, right hand guard, vibration damping system, and muffler condition.
Instructions for changing a broken starter cord and handling the recoil spring safely.
Procedures for cleaning and replacing the air filter, and checking/cleaning the spark plug.
Lubrication of the bar tip sprocket, needle bearing, and adjustment of the oil pump for chain lubrication.
Special measures for using the saw in cold weather and operating heated handles on applicable models.
A comprehensive schedule outlining daily, weekly, and monthly maintenance tasks for the chain saw.
Key technical data for the engine, ignition, fuel, and lubrication systems.
Technical data on noise emissions, vibration levels, and chain/bar specifications.
Lists approved guide bar and saw chain combinations for the specified models.
Statement of conformity to EU directives for the chain saw, including applicable standards.
To Next Page
General