Husqvarna 61 - Table of Contents; Contents

CONTENTS
English – 3
Contents
KEY TO SYMBOLS
Symbols on the machine: ..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents ............................................................... 3
INTR ODUCTION
Dear Customer , .................................................... 4
WHA T IS WHAT?
What is what on the chain sa w? ........................... 5
GENERAL SAFETY PRECA UTIONS
Bef ore using a new chain saw .............................. 6
Important .............................................................. 6
Always use common sense .................................. 6
Personal protective equipment ............................. 7
Machine ′ s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBL Y
Fitting the bar and chain ....................................... 16
FUEL HANDLING
Fuel ...................................................................... 17
Fueling .................................................................. 18
Fuel safety ............................................................ 18
ST ARTING AND STOPPING
Star ting and stopping ........................................... 19
W ORKING TECHNIQUES
Bef ore use: ........................................................... 21
General working instructions ................................ 21
How to avoid kickback .......................................... 28
MAINTENANCE
Gener al ................................................................. 30
Carburettor adjustment ......................................... 30
Checking, maintaining and servicing chain saw
safety equipment ..................................................
31
Muffler .................................................................. 33
Starter housing ..................................................... 34
Air filter ................................................................. 35
Spark plug ............................................................ 35
Lubricating the bar tip sprocket ............................ 36
Needle bearing lubrication ................................... 36
Adjustment of the oil pump ................................... 36
Cooling system ..................................................... 36
Winter use ............................................................ 37
Heated handles .................................................... 37
Maintenance schedule ......................................... 38
TECHNICAL D ATA
T echnical data ...................................................... 39
Guide bar and saw chain combinations ............... 40
Saw chain filing and file gauges ........................... 40
EC Declaration of Conformity ............................... 40