68 – English
Cleaning and Inspection
That measurement A is not below 1 mm.
Check that there is no play between the
clutch shoe and clutch hub
Check for wear on the chain sprocket.
Check the condition of the needle bearing
and the bearing surface on the crankshaft.
That the clutch drum friction surface and
bearing surface are undamaged.
That measurement B is not under 1 mm.
Clean all parts and inspect the following:
CENTRIFUGAL CLUTCH
B
A
Clutch shoes
with chamfers.
Clutch shoes
without chamfers.
Eng, p 40-82 96-09-13, 10.2668
To Next Page
Loading...
