Need help?Do you have a question about the Husqvarna 26 LC and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Power Output | 0.8 kW |
| Shaft Type | Straight |
| Engine Displacement | 25.4 cc |
| Handle Type | Loop |
Defines the limited warranty period for Husqvarna products based on usage type.
Outlines Husqvarna's commitment to remedy defects during the warranty period.
Lists components and conditions that are excluded from warranty coverage.
Details circumstances that void the warranty and limitations on damages.
Specifies customer duties for maintenance, operation, and warranty claims.
Provides steps for customers to follow when seeking warranty service.
Instructions for correctly installing the shield for operator protection.
Steps for correctly feeding trimmer line into the head assembly.
Procedures for attaching and detaching the trimmer head unit.
Guidance on installing spools with trimmer line correctly.
Detailed instructions for reassembling the trimmer head.
Steps for lubricating the drive shaft for optimal performance.
Instructions for installing the throttle cable for engine control.
Procedures for removing the throttle cable for maintenance.
Guide on how to replace the spark plug on the trimmer engine.
Steps to diagnose ignition system issues by checking for spark.
Information on locating and servicing the ignition switch.
Procedure to check engine acceleration for proper performance.
Procedure to check engine deceleration for proper idle return.
Steps for removing and cleaning the air filter.
Detailed guide for adjusting the carburetor for optimal engine performance.
Specific instructions for adjusting the high-speed fuel mixture.
Steps for adjusting the engine's idle speed for smooth operation.
Instructions for adjusting the low-speed fuel mixture.
Procedures for removing and installing the clutch assembly.
Steps for removing the starter rope assembly.
Steps for installing the starter rope assembly.
Detailed guide for replacing the cylinder and piston.
Instructions for replacing the piston ring.
Procedures for replacing the reed valve assembly.
Steps for removing the crankshaft.
Guide on replacing bearings in the crankcase.
Instructions for replacing seals in the crankcase.
To Next Page
