Need help?Do you have a question about the Husqvarna 265RX and is the answer not in the manual?
Explains various symbols related to machine operation, safety, and PPE.
Emphasizes reading the manual and understanding safety warnings before operation.
Details engine information, EPA compliance, and exhaust warnings.
Covers general advice, warnings, and essential PPE including helmet, hearing, and eye protection.
Details requirements for gloves, boots, and clothing for safe operation.
Describes the purpose and maintenance of the machine's safety features.
Explains the operation and safety function of the throttle lockout and stop switch.
Instructions for checking the correct operation of safety features like throttle lockout and stop switch.
Explains the function of the cutting attachment guard and warns against its misuse.
Describes the vibration damping system and warns about health risks from overexposure.
Explains the quick release feature for safety and freeing oneself from the harness.
Describes the muffler's function and the importance of spark arrestor meshes.
Explains the correct fitting and importance of locking nuts and screws.
Warns about hot mufflers, catalytic converters, and exhaust fume hazards.
Covers safe use, maintenance, and critical warnings for cutting equipment.
Instructions for sharpening grass cutters/blades and discarding damaged blades.
Details the process and angles for sharpening saw blades correctly.
Provides important tips for using trimmer heads, cord winding, and length.
Step-by-step instructions for assembling the handlebar and throttle for specific models.
Instructions for fitting the handlebar for 240F and 252RX models.
How to adjust the handlebar to a transport position for storage and transport.
Instructions for fitting the handlebar for the 265RX model.
Explains how to adjust the throttle trigger for optimal working position.
General safety warnings and instructions for assembling cutting attachments.
Detailed steps for fitting blade guards, grass blades, grass cutters, and saw blades.
Emphasizes the critical importance of tightening the lock screw for support cups.
Instructions for fitting the trimmer guard and the Trimmy S II trimmer head.
Instructions for fitting alternative guards and cutting attachments.
Guides on adjusting the harness and details on standard and Triobalance harness.
Crucial warning about securely hooking the clearing saw to the harness for safety.
Step-by-step guide to adjusting harness straps for secure and comfortable fit.
Explains how to achieve correct balance for forestry and grass clearing.
Covers essential safety measures, transport, and storage of fuel.
Details on recommended gasoline, two-stroke oil, and mixing ratios.
Instructions for mixing fuel and safe refueling practices.
Warning about hot catalytic converter mufflers and associated fire hazard.
Checklist for pre-start checks and critical safety warnings.
Detailed instructions for starting the engine in cold and warm conditions.
Detailed procedure for starting the engine, including pulling the starter cord.
Cautionary note on handling the starter cord to prevent machine damage.
Instructions on how to stop the engine by switching off the ignition.
Basic safety rules, working environment checks, and operating guidelines.
Warnings about thrown objects, material entanglement, and safety distances.
Advice on working methods and explanations of blade thrust risks.
Specific techniques for felling trees using a saw blade.
Methods for brush cutting with a saw blade and grass clearing with a grass blade.
Advice on cutting tightly packed stems and managing blade jamming.
Techniques for trimming grass with a trimmer head, including trimming and clearing.
How to use the trimmer head's fan effect for sweeping areas.
Explains carburetor function, adjustment controls, and procedure for optimal performance.
Critical safety warning about fitting the clutch cover and shaft before starting.
Details on adjusting low and high speed jets for optimal engine operation.
Warning to contact service if idle speed cannot be adjusted to stop the cutting attachment.
Notes on 265RX carburetor, indicators of correct adjustment, and muffler details.
Warning about hot catalytic converter mufflers and associated fire hazard.
Instructions for cleaning and oiling the air filter for different models.
Instructions for checking and filling the bevel gear with grease.
Advises replacing air filters that cannot be cleaned completely or are damaged.
Discusses spark plug condition, gap, and replacement.
Cautions on using correct spark plugs and genuine Husqvarna replacement parts.
A comprehensive schedule detailing daily, weekly, and monthly maintenance tasks.
Lists technical specifications for 240R and 240F models, including engine and fuel systems.
Provides information on sound pressure and vibration levels measured according to standards.
Lists technical specifications for 250R, 252RX, and 265RX models.
Details sound pressure and vibration levels for 250R, 252RX, and 265RX models.
Lists approved cutting attachments and their corresponding guard part numbers for 240R/240F.
Lists approved cutting attachments and guard part numbers for 250R.
Lists approved cutting attachments and guard part numbers for 252RX.
Lists approved cutting attachments and guard part numbers for 265RX.
Outlines the owner's rights and responsibilities regarding the emission control warranty.
Details the warranty coverage for emission-related parts on new small nonroad engines.
Specifies the owner's duty to perform required maintenance and proper use.
Explains when the warranty period begins and its duration.
Illustrates the installation process for the Trimmy S trimmer head.
Shows how to load new trimmer cord into the Trimmy S head.
Demonstrates the procedure for adjusting the trimmer cord length.
Instructions for fitting spacer and circlip for Trimmy S on specific models and serial numbers.
Step-by-step visual guide for installing the Trimmy S II trimmer head.
Illustrates loading new cord and adjusting the trimmer line.
Further visual steps for loading trimmer cord into the Trimmy S II head.
Detailed steps for installing and operating the Auto 55 trimmer head.
Shows cord loading, length management, and usage for the Auto 55 head.
Step-by-step guide for installing and assembling the Tri Cut cutting head.
Details on fitting blades, using fasteners, and torque specifications for Tri Cut.
To Next Page
General
