English – 43
3120
Slide up the back edge of the
spring with a screwdriver.
Use a punch to knock out the pin holding the
knee link.
Carefully unscrew the vice so that the pres-
sure rod and the ratchet move out of the
clutch cover.
Dismantle the pressure rod from the brake
band.
All saws except 3120
Remove the screw that holds the fixed end of
the band.
40, 42, 45, 51,
242, 246, 55, 254,
257, 262 and 394
36, 41, 61, 268,
272, 281 and 288
Knock out the band's fixed end using a
punch through the hole in the clutch cover
and remove the loose parts.
Lift up the band's fixed end using a screw-
driver and remove the loose parts.
SAFETY EQUIPMENT
Eng, p 40-82 96-09-13, 10.1443
To Next Page
Loading...
