Husqvarna 36 - Muffler

English – 49
Muffler
WARNING!
Do not touch the muffler until it
has cooled. Risk of burns!
Dismantling
!
SAFETY EQUIPMENT
B
C
A
If the saw is equipped with muffler mounting
(A), unscrew this from the crankcase and
muffler.
Unscrew the muffler from the cylinder
(M5 or M6 bolts, M5 or M6 nuts).
Remove the muffler, gasket and cooling plate
(B) if the saw is so equipped.
If the saw is equipped with a spark arrester
(C), remove this.
Saws 36 and 41
Saw 242 Cat
Dismantle the muffler
as shown in the figure
to the right.
Dismantle the muffler as shown
in the figure to the right.
!
A
1
WARNING!
The coating on and in the catalytic
converter element (A) is hazardous
to your health if touched. Wear
protective gloves when working on
a catalytic converter
Eng, p 40-82 96-09-13, 10.1549