Husqvarna 365 SPECIAL User Manual

365 SPECIAL, 372 XP
®
, 372 XP
®
G
EN Operator's manual 2-39

Husqvarna 365 SPECIAL Specifications

General

Brand	Husqvarna
Model	365 SPECIAL
Category	Chainsaw
Language	English

Summary

Safety Definitions and General Instructions

Fundamental Safe Operation Guidelines

Outlines fundamental safety guidelines for operating the chainsaw safely.

Safe Operation Practices

Kickback Prevention and Handling

Emphasizes understanding kickback causes and safe handling techniques.

Operator Readiness and Environment

Covers operating while fit, avoiding bad weather, and safe stances.

Pre-Operation Checks and Precautions

Ensures correct assembly, avoiding indoor use, and proper grip.

Advanced Safety and Protective Gear

Operating Safely and Emergency Preparedness

Covers operating height, emergencies, and safe product handling.

Personal Protective Equipment (PPE) Requirements

Lists and describes essential safety gear for operator protection.

Safety Device Functionality

Chain Brake and Throttle Lockout

Details the operation of the chain brake and throttle lockout.

Muffler, Fuel, and Cutting Equipment Safety

Safe Refueling Procedures

Essential precautions for refueling, including ventilation and ignition sources.

Maintenance and Cutting Equipment Safety

General safety rules for maintenance and handling cutting equipment.

Cutting Equipment Maintenance

Saw Chain Sharpness and Tension

Importance of keeping the saw chain sharp and correctly tensioned.

Depth Gauge Setting Adjustment

How to adjust the depth gauge to reduce kickback risk.

Chainsaw Operation and Fuel Basics

Pre-Operation Function Check

A checklist to ensure all parts function correctly before use.

Chain Oil Management and Kickback Hazards

Understanding and Preventing Kickback

Detailed explanation of kickback, its causes, and how to prevent it.

Chainsaw Starting Procedures

Cold and Warm Engine Starting

Step-by-step guides for starting both cold and warm engines.

Chainsaw Operation and Cutting Strokes

Starting and Stopping the Chainsaw

Procedures for starting, stopping, and safe positioning.

Limbing and Branch Cutting Procedures

Safe Limbing and Branch Cutting

Step-by-step guide for safely removing limbs and branches.

Tree Felling Process Overview

Felling Direction and Site Assessment

Tree Condition and Safety Checks

Tree Felling Execution Steps

Work Area Prep and Felling Hinge

Making Directional Cuts

Creating directional cuts to control the tree's fall.

Safe Corner Method for Felling

Bore Cuts, Wedges, and Trapped Trees

Winter Operation and Maintenance Introduction

Maintenance Schedule Overview

Safety Device Operational Checks

Throttle Trigger and Chain Brake Tests

Verifying throttle trigger and chain brake functionality.

Spark Plug Maintenance and Saw Chain Sharpening Introduction

Saw Chain Sharpening Importance

Saw Chain and Guide Bar Information

Saw Chain Sharpening Techniques

Guidance on how to properly sharpen the saw chain cutters using a file gauge.

Depth Gauge Adjustment and Saw Chain Tension

Adjusting Depth Gauge Setting

Saw Chain Tension Adjustment Steps

Procedures for correctly adjusting the tension of the saw chain.

Final Chain Tensioning, Sprocket, and Lubrication

Securing Bar Nuts and Checking Chain Movement

Saw Chain Lubrication Verification

Troubleshooting Engine Issues

Engine Failure to Start Diagnosis

Identifying causes like blocked starter pawls or incorrect fuel.

Troubleshooting Engine Problems and Storage

Engine Stops After Starting Diagnosis

Diagnosing issues causing the engine to stop after starting.

Chainsaw Safety Precautions (ANSI Standards)

Kickback Safety Best Practices

Critical advice for preventing and managing kickback incidents.

Safe Operation and Handling Guidelines

Additional Safety Precautions