Husqvarna 365 SPECIAL - Chainsaw Starting Procedures; Cold and Warm Engine Starting

To start the product
To prepare to start with a cold engine
WARNING: The chain brake must be
engaged when the product is started to
decrease the risk of injury.
1. Move the front hand guard forward to engage the
chain brake.
2. Set the start/stop switch to on.
3. Pull the choke control out to set the choke control in
choke position.
4. Push the decompression valve (A).
5. Continue to To start the product on page 13 for
more instructions.
To prepare to start with a warm engine
WARNING: The chain brake must be
engaged when the product is started to
decrease the risk of injury.
1. Move the front hand guard forward to engage the
chain brake.
2. Set the start/stop switch to on.
3. Pull out and push in the choke control.
4. Push the decompression valve.
5. Continue to To start the product on page 13 for
more instructions.
To start the product
WARNING: You must keep your feet in a
stable position when you start the product.
592 - 001 - 20.01.2020 13