What to do if red error LED flashing The ton Tem on Husqvarna 436LiB?
If the red error LED is flashing on your Husqvarna Blower, it could be due to a couple of reasons. It might be because the power trigger and the start button are pressed simultaneously; release them to activate the product. Alternatively, there could be a temperature deviation; in this case, let the product cool down.
Why is the red error LED flashing on my Husqvarna 436LiB battery charger?
If the red error LED is flashing on your Husqvarna Blower's battery charger, it indicates a temperature deviation. Ensure you are using the battery charger in an environment where the temperature is between 5 °C (41 °F) and 40 °C (104 °F).
What to do if the red error LED is flashing on my Husqvarna 436LiB Blower battery?
If the Red error LED is flashing on your Husqvarna Blower due to the battery, it could be for several reasons. The battery may be discharged, so charge the battery. There could be a temperature deviation, so use the battery in temperatures between -10°C (14°F) and 40°C (104°F). Over voltage can also cause this problem, so check that the mains voltage corresponds with that stated on the rating plate on the product. If none of the above, remove the battery from the battery charger.
Why is the red error LED flashing on my Husqvarna 436LiB?
If the red error LED is flashing on your Husqvarna Blower, it could be because the power trigger and the start button were pressed at the same time. To resolve this, release the power trigger, and the product should become active. Alternatively, it could be due to a temperature deviation. In this case, let the product cool down.
Explains visual symbols found on the machine itself.
Provides essential safety warnings for operating power tools.
Advises on user alertness, common sense, and keeping others safe.
Instructions on proper usage, maintenance, and care of power tools.
Alerts to the risk of children starting the machine and causing injury.
Details necessary protective gear like hearing, eye, and clothing.
Covers safety precautions for using Husqvarna batteries and chargers.
Specific warnings for handling and protecting batteries from heat and damage.
Instructions to avoid electric shock and short circuits with chargers.
Guidelines for safe operation and placement of the battery charger.
Pre-operation checks for the machine's condition and readiness.
Steps for correctly inserting the battery into the blower.
How to turn on the blower using the start button and LED indicator.
Procedures for turning off the blower and removing the battery.
Crucial safety rules to follow during operation, including distance and environmental awareness.
To Next Page
General
