Husqvarna 440 e-series - TECHNICAL DATA; Technical data; Motor; Chain;bar

English – 31
TECHNICAL DATA
1153159-95 Rev.2 2010-04-08
Technical data
445e TrioBrake 440e TrioBrake
Motor
Cylinder displacement, cu.in/cm
3
2,79/45,7 2,49/40,9
Cylinder bore, inch/mm 1,65/42 1,61/41
Stroke, inch/mm 1,30/33 1,22/31
Idle speed, rpm 2700 2900
Power, kW/hp @ rpm 2,1 / 2,8 @ 9000 1,8/2,4 @ 9000
Ignition system
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5
Fuel and lubrication system
Fuel tank capacity, US pint/litre 0,99/0,47 0,78/0,37
Oil pump capacity at 9,000 rpm, ml/min 13 13
Oil tank capacity, US pint/litre 0,55/0,26 0,53/0,25
Type of oil pump Not adjustable Not adjustable
Weight
Chain saw without bar or chain, empty tanks, lb/kg 11,4/5,2 10,1/4,6
Chain/bar
Standard bar length, inch/cm 15”/38 13"/33
Recommended bar lengths, inch/cm 13-20/33-50 13-18"/33-46
Usable cutting length, inches/cm 12-19/31-49 12-17"/31-43
Pitch, inch/mm 0,325/8,25 0,325/8,25
Thickness of drive links, inch/mm 0,050/1,3 0,050/1,3
0,058/1,5
Drive sprocket type/teeth Spur/7 Spur/7
Chain speed at max. power, m/sec 17,3 17,3