To Next Page
W
William GarciaAug 15, 2025
Why is the green start LED flashing on my Husqvarna 530iPX?
- RRegina CoxAug 15, 2025
If the green start LED flashes on your Husqvarna Pole Saw, it indicates low battery voltage. Charge the battery.
Why is the green start LED flashing on my Husqvarna 530iPX?
If the green start LED flashes on your Husqvarna Pole Saw, it indicates low battery voltage. Charge the battery.
What to do if the red error LED flashes on my Husqvarna Pole Saw?
If the red error LED flashes on your Husqvarna Pole Saw, it could be due to several reasons: * **Overload:** The cutting attachment might be blocked. Stop the product, remove the battery, and clean any materials blocking the cutting attachment. Also, loosen the chain. * **Temperature deviation:** The product might be overheating. Allow it to cool down. * **Simultaneous button press:** You might be pushing the power trigger and the start button at the same time. Release the power trigger and then push the start button.
Why is the error LED flashing on my Husqvarna Pole Saw?
If the error LED is flashing on your Husqvarna Pole Saw, it could indicate: * **Discharged battery:** Charge the battery. * **Temperature deviation:** Ensure you are using the battery in temperatures between -10°C (14°F) and 40°C (104°F).
What does it mean when the green activate LED is flashing on my Husqvarna 530iPX Pole Saw?
If the green activate LED is flashing on your Husqvarna Pole Saw, this indicates low battery voltage. Charge the battery.
Why does the red error LED flash on my Husqvarna 530iPX when charging?
If the red error LED flashes on your Husqvarna Pole Saw, and you're using a battery charger, it may be due to temperature deviation. Use the battery charger in temperatures between 5 °C (41 °F) and 40 °C (104 °F).
What does it mean when the error LED is lit on my Husqvarna Pole Saw?
If the error LED is lit on your Husqvarna Pole Saw, it means the cell difference is too much (1V). Contact your servicing agent.
Why does the red error LED come on my Husqvarna 530iPX?
If the red error LED comes on, it is necessary to do servicing on the product. Speak to your servicing dealer.
What does it mean when the green start LED flashes on my Husqvarna Pole Saw?
If the green start LED flashes on your Husqvarna Pole Saw, it indicates low battery voltage. Charge the battery to resolve this.
Why is the green activate LED flashing on my Husqvarna 530iPX?
If the green activate LED is flashing, it means the battery voltage is low. You should charge the battery.
General