Pixel
Pixel is a guide bar and saw chain combination that is
more light weight and designated to offer more energy
efficient use by cutting narrow cuts. Both guide bar and
saw chain need to be Pixel to get these benefits. Pixel
cutting equipment is marked with this symbol.
Filing equipment and filing angles
Use a Husqvarna file gauge to sharpen the saw chain.
A Husqvarna file gauge makes sure that you get the
correct filing angles. The part numbers are given in the
table below.
If you are not sure how to identify the type of saw chain
on your product, refer to www.husqvarna.com for more
information.
SP33G
4.8 mm / 3/16 in
586 93 84-04
0.025 in / 0.65
mm
30°
60°
H25 505 69 81-09 80°
H21 505 69 81-09 60°
S35G 587 80 91-02 60°
38 544 - 010 - 12.01.2023
To Next Page
Loading...
