CONTROLS
18 - Husqvarna
Blade Engagement Control
The blade engagement control is on the center control
panel.
In order to engage the blades, pull the control
upwards. The blades are disengaged when the lever is
pushed down.
8062-003
Blade control
Service Meter
Optional
The optional service meter displays the total operating
time. The meter will ash CHG OIL (Change Oil) at 50
hour intervals. The ash duration is one hour before
and one hour after the interval. The CHG OIL icon will
come on and shut off automatically. The hour meter
cannot be manually reset.
8062-003
Service meter
WARNING!
Gasoline is highly ammable.
Observe caution and ll the tank
outdoors (see the safety instruction).
8062-005
Parking brake
Parking Brake
The parking brake is located behind the right hand tire
and is applied by pressing the pedal downwards. To
disengage the parking brake, push down and pivot the
pedal to the rear.
To Next Page
Loading...
