327XP, 327XPG, 365SP
Guide bar Saw chain
Length, inch Pitch, in Gauge, in/mm Max. nose radius Type Length, drive
links (no.)
15
3/8 0.058/1.5 11T Husqvarna H42
56
16 60
18 68
20 72
24 84
28 92
The usable cutting length is usually 1 in less than the
nominal guide bar length.
Pixel
Pixel is a guide bar and saw chain combination that is
more light weight and designated to offer more energy
efficient use by cutting narrow cuts. Both guide bar and
saw chain need to be Pixel to get these benefits. Pixel
cutting equipment is marked with this symbol.
Filing equipment and filing angles
Use a Husqvarna file gauge to sharpen the saw chain. A
Husqvarna file gauge makes sure that you get the
correct filing angles. The part numbers are given in the
table below.
If you are not sure how to identify the type of saw chain
on your product, refer to www.husqvarna.com for more
information.
H42 5.5 mm / 7/32 in 505 69 81-07
0.025 in / 0.65
mm
25° 55°
C85 5.5 mm / 7/32 in 586 93 85-01
0.025 in / 0.65
mm
30° 60°
S85 5.5 mm / 7/32 in 586 93 86-01
0.025 in / 0.65
mm
30° 60°
36 592 - 002 - 30.11.2021
To Next Page
Loading...
