Husqvarna 365 SPECIAL Husqvarna 372 XP Husqvarna 372 XPG
Saw chain speed at 133%
of maximum engine power
speed, m/s.
27.5 28.5 28.5
Accessories
Recommended cutting equipment
Chainsaw models Husqvarna 365 SPECIAL, 372 XP,
372 XPG have been evaluated for safety according to
EN ISO 11681-1:2011 (Machinery for forestry - Portable
chainsaw safety requirements and testing) and fulfill the
safety requirements when equipped with the below listed
guide bar and saw chain combinations.
Low kickback saw chain
A saw chain that is designated as Low kickback saw
chain, meets the low kickback requirement specified in
ANSI B175.1-2012.
Kickback and guide bar nose radius
For sprocket nose bars the nose radius is specified by
the number of teeth, such as 10T. For solid guide bars
the nose radius is specified by the dimension of the
nose radius. For a given guide bar length, you can use a
guide bar with smaller nose radius than given.
327XP, 327XPG, 365SP
Guide bar Saw chain
Length, inch Pitch, in Gauge, in/mm Max. nose radius Type Length, drive
links (no.)
15
3/8 0.058/1.5
11T
Husqvarna S85
56
16 60
18
34mm
68
20 72
24 84
28 92
15
3/8 0.058/1.5
11T
Husqvarna C85
56
16 60
18
34mm
68
20 72
24 84
28 92
592 - 002 - 30.11.2021 35
To Next Page
Loading...
