31
BLADE CARE
For best results, mower blades must be kept
sharp. Replace bent or damage blades.
BLADE REMOVAL (See Fig. 8)
NOTE: Protect your hands with gloves and/or
wrap blade with heavy cloth.
• Remove blade bolt by turning
counterclockwise.
• Install new or resharpened blade with
stamped "THIS SIDE UP" facing deck
and cutter housing.
CUSTOMER RESPONSIBILITIES
IMPORTANT: SPECIAL BLADE BOLT IS HEAT
TREATED.
FIGURE 8
IMPORTANT: TO ENSURE PROPER ASSEMBLY,
CENTER HOLE IN BLADE MUST ALIGN WITH
STAR ON CUTTER HOUSING.
• Install and tighten blade bolt securely
(45-55 ft./lbs. torque).
2
1
5
3
4
1. BLADE
2. CENTER HOLE
3. STAR
4. CUTTER HOUSING
5. BLADE BOLT (SPECIAL)
To Next Page
Loading...
