Husqvarna Aspire LC34-P4A

Questions and Answers

J
Justin JohnsonAug 7, 2025
What to do if the Error LED flashes and my Husqvarna Aspire LC34-P4A stops?
- D
  David PerezAug 7, 2025
  If the Error LED flashes and the product stops, several issues could be the cause. It could be due to high battery temperature because the environment is too hot, or there's an overload in the motor. Other potential causes include a battery connector failure, a weak battery, a battery error, no signal from the battery, or an incorrect start procedure. Suggested solutions include: removing the battery to cool it down if the temperature is too high, increasing the cutting height if there's an overload, examining the battery connector, charging the battery if it's weak, ensuring the battery is correctly installed, and releasing then re-engaging the motor brake handle if the start procedure was incorrect.
A
Alan FitzgeraldAug 14, 2025
What to do if Error LED flashes and my Husqvarna Lawn Mower does not operate correctly?
- T
  Tonya PughAug 14, 2025
  If the error LED flashes and the product doesn't operate correctly, it could be due to a blocked blade or the motor speed dropping too much. To resolve this, first, turn the safety key to 0 and remove the battery. Wait a few seconds, then remove any obstacles blocking the blade, ensuring it can rotate freely. Also, increase the cutting height.
S
Steven BurtonAug 21, 2025
Why are the green and red LEDs flashing on my Husqvarna Lawn Mower charger?
- J
  jonathanchanAug 21, 2025
  If the green LED is on and the red LED flashes, it could be due to several reasons: the battery is not correctly installed in the charger, the battery connectors are dirty, the charger has identified an internal error, or the battery is defective. Try removing and reinstalling the battery, cleaning the battery connectors. Also, remove the mains plug and reinsert it. If the error continues, the battery may need replacing.
E
ehicksAug 29, 2025
What to do if the red LED is on and the green LED is off on my Husqvarna Lawn Mower charger?
- J
  Jacob DavisAug 29, 2025
  If the red LED is on and the green LED is off, the battery temperature might be outside the charging range. Wait until the battery temperature is back within the permitted charging temperature range (0-45°C).

Summary

Introduction to the Lawn Mower

Product Overview

Details components and parts of the lawn mower for user identification.

Symbols on Product

Explains the meaning of various warning and informational symbols displayed on the product.

Safety and Product Information

Safety Definitions

Clarifies the meaning of warnings, cautions, and notes used throughout the manual.

Symbols on Battery and Charger

Describes symbols found on the battery and battery charger.

General Product Safety Warnings

Work Area Safety

Guidelines for maintaining a safe work environment while operating the product.

Electrical Safety

Crucial safety precautions related to the product's electrical components and usage.

Personal Safety

Advice on personal preparedness and behavior to prevent injuries during operation.

Battery Tool Use and Care

Lawnmower Safety Warnings

Specific safety precautions for operating the lawnmower.

Residual Current Device

Information on using an RCD for enhanced electrical safety.

General Safety Instructions

Work Safety

Safety measures related to the working environment and product handling.

Safety Instructions for Operation

Key instructions for safe operation of the lawnmower.

Personal Protective Equipment

Recommended protective gear for safe operation.

Safety Devices on Product

Safety Device Checks

Procedures to check the functionality of safety devices like cutting cover, key, brake, and inhibitor.

Battery Safety

Battery Charger Safety

Safety guidelines for using the battery charger.

Assembly

Adjusting Handle Height

Guide on how to adjust the handle height for optimal user comfort.

Installation Procedures

Steps for installing grass catcher, mulch plug, and wall hook.

Operation

Husqvarna Connect App

Information on using the mobile app for extended product features.

Setting Operation Position

Steps to set up the lawnmower for operation from its transport position.

Setting Cutting Height

How to adjust the cutting height of the lawnmower for desired grass length.

Battery Charging

Charging the Battery

Detailed instructions on how to charge the product's battery.

Product Operation

Starting and Stopping the Product

Step-by-step guide on how to start and safely stop the lawnmower.

Battery Status Indicators

Explains the meaning of LED indicators for battery status on the product and charger.

Maintenance

Maintenance Schedule

Overview of recommended maintenance tasks and their intervals.

Cleaning Procedures

Guidelines for cleaning the product, battery, and battery charger.

Cutting Equipment Maintenance

Examining Cutting Equipment

How to inspect the cutting equipment for damage or wear.

Replacing the Blade

Detailed steps for safely removing and installing the lawnmower blade.

Troubleshooting Battery Charger

Battery Charger LED Error Codes

Explains causes and solutions for error indicators on the battery charger.

Troubleshooting the Lawn Mower

Error LED Flash Codes

Diagnosing issues based on error LED flash patterns for product malfunctions.

Transportation, Storage, and Disposal

Setting for Transport Position

How to adjust the product for safe transport.

Transportation Guidelines

Regulations and advice for transporting the lawnmower.

Storage Instructions

Setting for Storage Position

Steps to prepare the product for storage.

Storing the Product

Methods for storing the lawnmower horizontally, vertically, or on a hook.

Disposal Information

Technical Data

Motor and Weight Specifications

Technical details of the motor, weight, and battery type.

Noise and Sound Level Data

Data regarding the product's noise emissions and sound pressure levels.

Approved Batteries and Chargers

Battery Specifications

Technical details for approved batteries, including capacity and voltage.

Battery Charger Specifications

Technical details for approved battery chargers.

EU Declaration of Conformity

Product Compliance with EU Directives

Identifies the product and lists relevant EU directives it complies with.

Applied Standards and Notified Body

Lists applied technical standards and details about the notified body.

UK Declaration of Conformity

Product Compliance with UK Regulations

Identifies the product and lists relevant UK regulations it complies with.

Applied Standards and UK Importer

Lists applied technical standards and the UK importer details.

Licenses and Software Terms

Copyright and Warranty Disclaimer

Details copyright information and disclaimers regarding product warranty.

Apache 2.0 License Terms

Explains the terms and conditions for using the Apache 2.0 licensed software.

Registered Trademarks

QR Code Trademark

Information about the registered trademark status of the QR Code.

Husqvarna Aspire LC34-P4A Specifications

General

Power source	Battery
Cutting width	34 cm
Cutting height steps	6
Drive system	Push
Collector volume	30 L
Handle type	Ergonomic
Soft grip	Yes
Folding handle	Yes
Sound power level, guaranteed (LWA)	90 dB(A)
Battery Voltage	18 V
Battery Type	Li-Ion
Cutting Height Adjustment	Central
Deck Material	Plastic
Warranty	2 years
Cutting Width (inches)	13.4 in
Engine Type	Electric