Husqvarna DRT900E User Manual

English/French
532 44 80-61 Rev. 1
Operator’s Manual
Manuel de L’Opérateur
DRT900E / 960930023
Gasoline containing up to 10% ethanol (E10) is accept-
able for use in this machine. The use of any gasoline ex-
ceeding 10% ethanol (E10) will void the product warranty.
Vous pouvez utiliser de l’essence contenant jusqu’à
10 % d’éthanol (E10) avec cet appareil. L’utilisation
d’essence contenant plus de 10 % d’éthanol annulera
la garantie du produit.
Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.
Lisez très attentivement et soyez certain de comprende
ces instructions avant d’utiliser cette machine.

Husqvarna DRT900E Specifications

General

Brand	Husqvarna
Model	DRT900E
Category	Tiller
Language	English

Summary

Safety Rules

Training Procedures

Familiarize yourself with controls, proper use, and quick stopping procedures.

Preparation Guidelines

Inspect the area, handle fuel with care, and ensure proper footing before use.

Safe Operation Practices

Safe operating practices, including avoiding moving parts and handling hazards.

Maintenance and Storage

Guidelines for keeping the machine in safe working condition and proper storage.

Spark Plug Wire Safety Caution

Disconnect spark plug wire to prevent accidental starting during maintenance.

Engine Exhaust Emissions Warning

Engine exhaust contains chemicals known to cause cancer and reproductive harm.

Product Specifications

Fuel and Oil Specifications

Details gasoline capacity, oil type, and viscosity grades for the tiller.

Spark Plug Information

Specifies the recommended spark plug type and gap setting for the engine.

Customer Responsibilities

Safety and Maintenance Adherence

Operator's duty to follow safety rules, maintenance schedules, and storage instructions.

Spark Arrester Requirements

Information on spark arrester use, especially for specific land types and legal compliance.

Assembly Instructions

Tools Required for Assembly

List of tools needed for assembling the tiller, including wrenches and pliers.

Operator's Position Definition

Definition of 'right' and 'left' hand reference based on the operator's position.

Hardware Pack Contents

Inventory of hardware components included in the tiller's assembly package.

Unpacking Carton

Instructions for safely unpacking the tiller from its shipping carton.

Handle Installation

Step-by-step guide for installing the tiller's handle assembly securely.

Shift Rod Connection

Procedure for connecting the shift rod to the shift lever indicator.

Tiller Removal from Crate

Steps to safely remove the tiller from its shipping crate.

Tire Pressure Check

Instructions on checking and adjusting tire pressure for optimal performance.

Handle Height Adjustment

Information on adjusting the handle height for operator comfort.

Operation Guide

Know Your Tiller Controls

Familiarize yourself with tiller controls and symbols before operation.

Control Descriptions

Explanation of the function of various controls like Choke, Depth Stake, Drive Control Bar.

How to Use Your Tiller

Guide to operating all controls before adding fuel or starting the engine.

Stopping Procedures

Procedures for stopping both the tines/drive and the engine safely.

Tine Operation with Wheel Drive

How to engage tines using the drive control bar and shift lever.

Forward Operation (Wheels Only)

Operating the tiller in forward gear with tines disengaged.

Reverse Operation (Wheels Only)

Operating the tiller in reverse gear with tines disengaged.

Troubleshooting Hard to Shift Gears

Troubleshooting tips for shifting gears when encountering resistance.

Depth Stake Adjustment

How to adjust the depth stake for tilling or transporting.

Turning the Tiller

Instructions for safely turning the tiller around in the field.

Cultivating Soil

Methods for cultivating soil to control weeds and retain moisture.

Outer Side Shield Adjustment

How to adjust outer side shields for depth tilling or protecting small plants.

Transporting the Tiller

Precautions before lifting or transporting the tiller, including cooling and fuel draining.

Before Starting Engine

Important precautions before starting the engine, focusing on cleanliness and fluid checks.

Check Engine Oil Level

Procedure for checking the engine oil level and ensuring it is at the proper point.

Adding Gasoline

Guidelines for filling the fuel tank safely and using the correct type of gasoline.

Starting Engine with Electric Starter

Instructions for starting the engine using the electric starter system.

Starting Engine with Recoil Starter

Instructions for starting the engine using the recoil starter mechanism.

Tilling Hints

Advice for starting tilling operations, especially for new users.

Tilling Procedures

Detailed guide on tilling techniques, soil conditions, and turning.

Adjust Wheels for Cultivating

Procedure to adjust wheel positioning for increased stability during cultivating.

Maintenance Guide

Maintenance Schedule

Table outlining maintenance tasks and their recommended frequencies (before use, hours, season).

General Recommendations

Advice on warranty, adjustments, and regular checks like spark plug and filters.

Before Each Use Checks

Essential checks to perform before every operation of the tiller.

Lubrication Procedures

Guidance on keeping the unit well lubricated, referring to the lubrication chart.

Cooling System Maintenance

Instructions for cleaning the engine's cooling system, including air screen and fins.

Engine Lubrication Details

Details on selecting the correct oil viscosity grade based on temperature.

Air Filter Service

Procedures for servicing the pre-cleaner and paper cartridge air filter.

Changing Engine Oil

Step-by-step instructions for draining and refilling the engine oil.

Spark Plug Replacement

Recommendation to replace spark plugs seasonally or after 50 hours of use.

Transmission Lubrication

Guidance on lubricating the right-hand side gear case grease fitting once a season.

Cleaning the Tiller

Advice on cleaning the tiller, avoiding pressurized water, and protecting surfaces.

Muffler and Spark Arrester

Safety warnings and maintenance for the muffler and spark arrester.

Service and Adjustments

Adjust Handle Height

Steps to adjust the tiller's handle height for optimal operator comfort.

Tire Care Instructions

Recommendations for maintaining tire pressure and protecting tires from damage.

Remove Tiller Wheel

Procedure for safely removing a tiller wheel for maintenance or repair.

Remove Belt Guard

Instructions for removing the belt guard for access to internal components.

Replace Ground Drive Belt

Step-by-step guide for replacing the ground drive belt on the tiller.

Ground Drive Belt Adjustment

Procedure for adjusting the ground drive belt tension using the extension spring.

Tine Replacement Guide

Guide on checking tines for wear, sharpness, and bending, and when to replace them.

Adjust Throttle Control Cable

Procedure for adjusting the throttle control cable for proper high-speed stop engagement.

Carburetor Adjustment Information

Information stating the carburetor is factory preset and tamper warnings.

Storage Procedures

Tiller Storage Preparation

Instructions for preparing the tiller for storage, including cleaning and lubrication.

Engine Oil for Storage

Procedure for draining and replacing engine oil before storage.

Cylinder Preparation for Storage

Steps for preparing the engine cylinder for storage, including oiling and spark plug replacement.

Fuel System Storage

Important steps to prevent gum deposits and damage to the fuel system during storage.

General Storage Advice

General storage advice, including fuel handling, indoor storage, and protective covers.

Troubleshooting

Engine Will Not Start

Common causes and corrections for the engine failing to start.

Engine Hard to Start

Causes and corrections for an engine that is difficult to start.

Loss of Engine Power

Troubleshooting for a tiller experiencing a loss of engine power.

Engine Overheating

Causes and corrections for the engine overheating during operation.

Excessive Bounce or Difficult Handling

Troubleshooting for excessive bouncing or difficult handling of the tiller.

Soil Balling or Clumping

Causes and corrections when soil clumps or balls up during tilling.

Engine Runs, Tiller Won't Move

Troubleshooting when the engine runs but the tiller does not move.

Engine Labors During Tilling

Causes and corrections for the engine laboring while the tiller is operating.

Limited Warranty Information

Warranty Coverage Details

Details on what components and conditions are covered by the limited warranty.

Warranty Exclusions

Exclusions from the warranty, including wear parts, misuse, and improper maintenance.

Customer Responsibilities for Warranty

Operator's duties for preserving warranty rights, including maintenance and immediate reporting of issues.

Warranty Legal Terms

Legal disclaimers, limitations on liability, and consumer rights under the warranty.

Warranty Chart by Product Type

Handheld Products Warranty

Warranty periods for various handheld products like chain saws and trimmers.

Consumer Wheeled Products Warranty

Warranty periods for consumer wheeled products like mowers and tillers.

Commercial Wheeled Products Warranty

Warranty periods for commercial wheeled products, often with shorter terms.

Engine Warranty Information

Warranty information for engines, often covered separately by the manufacturer.

Transmission and Drive Systems Warranty

Warranty details for transmission and drive systems, including specific manufacturers.

Parts and Accessories Warranty

Warranty coverage for purchased parts and accessories.

Product Registration Process

Instructions and contact information for registering the product for warranty purposes.