What to do if Husqvarna GARDENA SILENO R100Li is upside down?
If the Husqvarna Lawn Mower is 'Upside down', it means it is leaning too much or has turned over. Turn the mower the right way up and fix the cause of it turning over.
Why does my Husqvarna GARDENA SILENO R100Li Lawn Mower say guide not found?
If your Husqvarna Lawn Mower displays 'Guide not found', the mower is no longer receiving signals from the guide wire. Check the guide wire connection to the charging station. There may be a break in the guide wire. If the mower was used on another installation with different guide wires, this message can appear.
What to do if Husqvarna GARDENA SILENO R100Li is having difficult finding home?
If your Husqvarna Lawn Mower says 'Difficult finding home', the mower followed the boundary wire but didn't find the charging station. Check the boundary wire's corridor width setting and location.
What does 'Alarm! Mower switched off' mean on my Husqvarna GARDENA SILENO R100Li Lawn Mower?
If your Husqvarna Lawn Mower displays 'Alarm! Mower switched off', the alarm was activated because the mower was switched OFF. Adjust the mower security level in the Security menu.
What does 'Alarm! Mower stopped' mean on my Husqvarna Lawn Mower?
If your Husqvarna Lawn Mower displays 'Alarm! Mower stopped', the alarm was activated because the mower was stopped. Adjust the mower security level in the Security menu.
What does 'Alarm! Mower lifted' mean on my Husqvarna GARDENA SILENO R100Li?
General| Brand | Husqvarna |
|---|---|
| Model | GARDENA SILENO R100Li |
| Category | Lawn Mower |
| Language | English |
Details components of Husqvarna Automower models 310/315.
Details components of GARDENA Sileno/Sileno+ models.
Guidelines for optimal placement and setup of the charging station.
Instructions for installing the boundary wire.
Installation of the guide wire for mower navigation.
Performing a comprehensive automatic test of mower components.
Updating mower software via Autocheck EXP.
Detailed procedure for replacing the mower's main circuit board.
Lists and explains fault and information messages from the mower.
Describes common symptoms and their potential causes and actions.
Step-by-step guide to diagnose loop signal issues.
Methods for locating breaks in the boundary wire.
To Next Page