Husqvarna LC 221RH - Page 21

Transmission assembly overview
4
2
1
11
12
8
9
10
6
7
5
3
1. Mulch plug
2. Rear insert
3. Transmission pulley
4. Idler bracket
5. Transmission cover
6. Blade adapter
7. Idler pulley
8. Belt cover
9. Blade
10. Lock washer
11. Hard washer
12. Blade bolt
To replace the drive belt
1. Operate the product until the fuel tank is empty.
2. Remove the ignition cable from the spark plug.
3. Put the product on its side with the muffler down.
1205 - 002 - 08.07.2019 15