English
–
5
KEY
T
O SYMBOLS
Symbols
These symbols are on the machine and in the instr
uctions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
Fast
Slow
Stop the engine.
Choke
Fuel
Oil level
Cutting height
Backwards
Forwards
Ignition
Hydrostatic freewheel
Parking brake
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in chapter Technical data and on
label.
Clutch in
Clutch out
Warning: rotating parts. Keep hands and
feet clear.
Rotary blades Keep hands and feet
away from under the hood when the
engine is running
Never drive across a slope
Never use the machine if persons,
especially children, or animals, are in the
vicinity
Never carry passengers on the machine
or equipment
Drive very slowly if no cutting unit is fitted
Brake
Starting instructions
Switch off the engine and
take off the ignition cable before repairs or
maintenance
To Next Page
Loading...
Need help?
General
