Husqvarna pw3100 User Manual

Not
for
Reproduction
Main Unit
316332
NOTE: Unless noted otherwise,
use the standard hardware torque
specication chart.
PART NO. DESCRIPTIONREF.
Footnotes
PART NO. DESCRIPTIONREF.
BASE 1 316434GS
HANDLE 2 313252GS
GRIP, Handle 3 316502GS
GRIP, Handle 4 316501GS
SCREW, M5-0.8 x 20 5 **
CAP, Plug 6 316712GS
SCREW, M6 x 18 7 **
MOUNT, Vibration 8 316713GS
NUT, M6 1.0 9 **
T-KNOB 10 316732GS
SCREW 11 316508GS
WASHER, Flat, M8 12 **
VALVE, Chemical Tank 13 317106GS
NUT, M8 FLANGE 14 **
DECAL 15 316726GS
SCREW, M6 x 10 16 **
CAP, Chemical Tank 17 316764GS
WIREFORM 18 316500GS
KNOB 19 194289GS
TANK, Chemical 20 316342GS
DECAL 21 316936GS
CAP, Fuel 22 316670GS
DECAL 23 316778GS
SCREW, M6 x 25 HEX 24 **
WASHER 25 312005GS
VALVE, Fuel 26 209417GS
GROMMET 27 30809GS
TANK, Fuel 28 315531GS
BARB, Hose 29 317025GS
WRAP, Hose 30 316374GS
SCREW, M6-1.0 x 16 31 **
HOSE, Vapor (cut to t) 32 315017GS
CLAMP 33 48031JGS
* Contact Engine Manufacturer for parts and service.
4
The above parts group applies to the following Mfg. Nos.:
Briggs & Stratton Power Products Group, LLC
Copyright © by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
2012
317740
020490-00 - 3,100 PSI Hus qvarna

Husqvarna pw3100 Specifications

General

Max Pressure	3100 PSI
Flow Rate	2.5 GPM
Pump Type	Axial Cam
Hose Length	25 ft
Power Source	Gasoline
Engine Type	4-stroke
Detergent System	Yes, onboard detergent tank