11 Technical data
11.1 Technical data
R 214C
Dimensions
Length without cutting deck, mm 1960
Width without cutting deck, mm 883
Length including cutting deck
1
, mm 2243
Width including cutting deck
1
, mm 994
Height, mm 1120
Weight without cutting deck, with empty tank, kg 191
Weight including cutting deck
1
, with empty tank, kg 228
Wheel base, mm 887
Track width, front, mm 712
Track width, rear, mm 627
Tire dimensions 16.5×6.0×8
Tire pressure, rear – front, kPa / bar / PSI 60 / 0.6 / 8.5
Max. gradient, degrees ° 10
Engine
Brand / Model Husqvarna / HS 413AE
Nominal engine output, kW
2
8.4
Displacement, cm
3
413
Max. engine speed, rpm 3000 ± 100
Forward speed, km/h 0–9
Reverse speed, km/h 0–6
Fuel, min. octane grade 91
Tank volume, liters 12
Oil Class SF, SG, SH or SJ SAE40, SAE30,
SAE10W-30, SAE10W-40 or SAE5W-20
Oil volume incl. filter, liters 1.4
Oil volume excl. filter, liters 1.2
Start motor Electric start 12V
Transmission
Brand Tuff Torq
Model K46H
Oil, class SF-CC SAE 10W/40
Electrical system
1
Measured with cutting deck Combi 94
2
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production en-
gine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from
this value. Actual power output for the engine installed on the final product will depend on the operating speed,
environmental conditions and other values.
1592 - 002 - 11.02.2021 Technical data - 49
To Next Page
Loading...
Need help?
General
