English – 15
PRESENTATION
Presentation
Congratulations on your choice of an excellent quality product
that will give you great pleasure for many years. This
operator’s manual describes Rider 220T and
Rider 322T AWD.
The machine 322T AWD are equipped with all wheel drive,
chronometer and lights
.
The power transmission from the engine is handled by a
h
ydrostatic transmission, which allows variable variation of
the speed by using the pedals.
One pedal for driving forward and one for reverse.
Throttle trigger
The throttle control regulates the engine speed, and thereby
also the rotation speed of the blades.
To increase or reduce the engine speed the control is moved
bac
kwards or forwards.
Avoid idling the engine for long periods, as there is a risk of
carbon b
uild-up on the spark plugs.
Choke control
The choke lever is used for cold starting and to give the
engine a richer fuel mixture.
For cold starting the lever is moved backwards to its end
position.
Speed limiter
The speed of the machine is steplessly regulated with two
pedals. Pedal (1) is used to drive forwards, and pedal (2) to
drive backwards.
Parking brake
The parking brake is applied as follows:
1 Press down the parking brake pedal (1).
2 Press in the lock button (2) on the steering column.
3 Release the parking brake pedal while keeping the button
pressed in.
The parking brake lock disengages automatically when the
br
ake pedal is pressed.
Cutting unit
Rider 220T and Rider 322T AWD can be equipped with three
different cutting units
• Combi 103
• Combi 112
• SD 48
The Combi-unit, equipped with a BioClip-plug, finely chops
the cuttings to f
ertiliser. Without the BioClip-plug the unit
works in the same way as a rear ejection unit.
!
WARNING! Make sure that branches do not
obstruct the pedals when mowing under
bushes. Otherwise there is a risk you may
lose control.
1
2
1
2
To Next Page
Loading...
Need help?
General
