Need help?Do you have a question about the Husqvarna Rancher 55 and is the answer not in the manual?
General| Weight | 5.2 kg |
|---|---|
| Fuel Tank Volume | 0.5 L |
| Oil Tank Volume | 0.3 L |
| Power Output | 2.5 kW |
| Chain Gauge | 0.058" |
| Sound Power Level, Guaranteed | 114 dB(A) |
| Chain Pitch | 0.325" |
Explains the meaning of various safety and operational symbols used with the chain saw.
Details essential protective gear required for safe chain saw operation, including head, eye, ear, and body protection.
Outlines key safety features of the saw and their inspection, such as chain brake, throttle lock, and chain catcher.
Explains the operation of the chain brake and front hand guard for accident prevention.
Details the throttle lock and chain catcher functions for enhanced safety.
Covers vibration damping, stop switch operation, and muffler function and safety.
Covers muffler function, hot surface warnings, and maintenance for spark arrestor screens.
Warns about health effects of vibration and advises medical consultation.
Details checks for brake band wear, hand guard condition, and brake trigger function.
Describes checks for throttle lock, chain catcher, guards, and damping system integrity.
Explains how to verify the stop switch effectively shuts off the engine.
Addresses muffler safety and introduces five basic rules for cutting equipment maintenance.
Explains how bar tip radius and chain type affect kickback and recommends combinations.
Provides guidance on chain sharpness, cutting teeth, and the process of sharpening teeth.
Details procedures for setting raker clearance and adjusting chain tension for safety and performance.
Emphasizes lubrication importance and explains how to fill the chain oil tank.
Covers checking chain lubrication and wear on chains, sprockets, and bars.
Details bar maintenance checks and defines kickback, introducing the kickback zone.
Provides general rules and cutting techniques to minimize kickback risk.
Covers general safety rules and precautions for handling fuel and refuelling.
Outlines fundamental safety practices and stresses awareness of kickback.
Explains cutting principles, log support, and techniques for different log conditions.
Covers safe distances, felling direction planning, and limbing advice.
Describes clearing the work area and the directional and felling cuts for controlled tree fall.
Provides guidance on freeing trapped trees and safely cutting tensioned branches.
Identifies and labels all major components of the chain saw.
Step-by-step guide on how to correctly mount the guide bar and saw chain.
Explains correct fuel mix ratios, gasoline requirements, and recommended oil types.
Outlines critical safety precautions to take when refuelling.
Provides detailed instructions for safely starting both cold and warm engines.
Explains the simple procedure for safely shutting off the engine.
Details carburetor adjustment basics and fine-tuning for optimal engine performance.
Instructions for replacing starter cord and recoil spring with safety warnings.
Covers maintenance of air filter, spark plug, and muffler for engine health.
Instructions for lubricating the needle bearing on the drive shaft for longevity.
Details cleaning the cooling system, centrifugal cleaning, and preparations for winter use.
Outlines essential daily, weekly, and monthly maintenance tasks for the chain saw.
Provides detailed technical specifications and recommended cutting equipment.
Explains warranty terms, coverage, and owner's responsibilities for maintenance.
To Next Page