Husqvarna Rider 11 R - Page 34

34 – English
TECHNICAL DATA
´®z+S!|¶6¶¨
´®z+S!|¶6¶¨
Note 1 The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the engine model measured to SAE
standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on the final machine will depend on the
operating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion (standard de
viation) of 1.2 dB(A).
Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard de
viation) of 0.2 m/s
2
(steering wheel) and
0.8 m/s
2
(seat).
Rider 16 C
Dimensions
Length with cutting unit, mm/ft 2220/7,29
Width with cutting unit, mm/ft 1000/3,29
Height, mm/ft 1070/3,52
Operating weight with cutting deck, kg/lb 232/511
Wheel base, mm/ft 887/2,9
Track width, front, mm/ft 712/2,34
Track width, rear, mm/ft 627/2,06
Tyre dimensions 165/60-8
Air pressure, rear - front, kPa / bar / PSI 60 (0,6/8,5)
Max. gradient 10
°
Engine
Brand / Model Briggs & Stratton/31A6
Nominal engine output, kW (see note 1) 9,8
Displacement, cm
3
/cu.in 502
Max.motor speed, r/min 2900 ± 75
Fuel, minimum octane grade lead-free 85
Fuel tank capacity, litre 10
Oil synthetic, class SJ-CF SAE 5W/30 or SAE 10W/30
Oil tank capacity, litre/USqt 1,4/1,5
Starting Electric starter
Electrical system
Type 12 V, negative earthed
Battery 12 V, 24 Ah
Spark plug EMS Q
Electrode gap, mm/inch 0,75/0,030
Main fuse Flat pin, 15 A.
Noise emissions and cutting width
(see note 2)
Sound power level, measured dB(A) 96
Guaranteed noise level 97
Cutting width, cm/inch 94/37
Sound power level
(see note 3)
Sound pressure level at the operators ear, dB(A) 84
Vibration levels
(see note 4)
Vibration level on the steering wheel, m/s
2
2,5
Vibration level in the seat, m/s
2
0,7
Transmission
Brand Tuff Torq
Oil, class SF-CC SAE 10W/30
Number of forward gears -
Number of reverse gears -
Forward speed, km/h. 0-9
Reverse speed, km/h 0-6
Cutting unit
Type CombiClip 94
Cutting heights, 7 positions, mm/inch 25-75/0.98-2.95
Blade length, mm/inch 358/14.09