Need help?Do you have a question about the Husqvarna Rider 15 Pro and is the answer not in the manual?
Checklist of tasks to perform before the machine is delivered to the customer.
Instructions for safely filling the battery with acid and charging it.
Procedure for securely attaching the steering wheel to the steering column.
Steps to attach the seat to the rider frame using the spring pin.
Guide to attaching the cutting unit to the rider mower, including support wheels.
How to adjust the cutting unit's ground pressure using screws for optimal cutting.
Procedure to measure and set the cutting unit's forward slope for correct cutting.
Detailed steps for adjusting the cutting unit's pitch using the lift strut.
Instructions for safely detaching the cutting unit from the mower.
Description of the service position for easier access to the cutting unit.
Step-by-step guide to place the cutting unit into its service position.
Instructions to return the cutting unit from service position to operating position.
Diagram and sequence for assembling the front and rear wheels.
General| Transmission | Hydrostatic |
|---|---|
| Drive | Rear-wheel drive |
| Hour Meter Type | Digital |
| Service Interval Indicator | Yes |
| Pivoting Rear Axle | Yes |
| Front-wheel Drive | No |
| Parking Brake | Yes |
| Cylinders | 1 |
| Engine Cooling | Air |
| Tyre Size Rear | 16x6.5-8" |
| Cylinder displacement | 344 cc |
| Cutting Height Adjustment | Central |
To Next Page