EasyManua.ls Logo

Husqvarna Rider 213 C - Parking brake; Protective covers

Husqvarna Rider 213 C
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
English
MACHINE´S SAFETY EQUIPMENT
Parking brake
The parking brake is applied as follows:
1 Press down the parking brake pedal.
2 Press in the lock button on the steering column.
3 Release the parking brake pedal while keeping the button
pressed in.
The parking brake lock disengages automatically when the
brake pedal is pressed.
Checking the parking brake
Make sure the parking brake is properly adjusted by placing
the machine on a slope.
Apply the parking brake.
When the machine does not stand still, the parking brake
should be adjusted.
Muffler
The muffler is designed to keep noise levels to a minimum
and to direct exhaust fumes away from the user.
Inspecting the muffler
Check that the muffler is securely attached and not
damaged.
Protective covers
Protective covers on the machine protects the user from the
cooling fan, belt drives and hot surfaces.
Checking the protective covers
Check the protective covers for cracks or other damages.
Replace damaged covers.
1 Engine cover
2 Front cover
3 Right-hand fender
4 Left-hand fender
!
WARNING! Never use a machine without a
muffler, or with a faulty muffler. A damaged
muffler may substantially increase the noise
level and the fire hazard. Keep fire fighting
equipment handy.
!
WARNING! The inside of the muffler contain
chemicals that may be carcinogenic. Avoid
contact with these elements in the event of a
damaged muffler.
The muffler gets very hot during and after
use as well as when idling. Be aware of the
fire hazard, especially when working near
flammable substances and/or vapours.
!
WARNING! Always check that the protection
covers are correctly fitted before starting the
machine.
1
2
3
4

Table of Contents

Other manuals for Husqvarna Rider 213 C

Related product manuals