4 – English
KEY TO SYMBOLS
Symbols
The symbols below are used in this operator’s
manual.
Warning Signs
The decal with the symbols below is found on the
one-man sawmill.
Boots or work shoes with steel
toecaps and non-slip soles
should be worn.
Eye protection and hearing
protection should be used.
Read this manual carefully
and make sure you under-
stand it before attempting to
use the one-man sawmill.
Exercise caution.
Protective gloves should be
worn.
Eye protection and hearing
protection should be used.
Boots or work shoes with
steel toecaps and non-slip
soles should
be worn.
Eye protection should be
used.
Protective gloves should be
worn.
Switch off the engine by
moving the stop switch to the
STOP position before carry-
ing out any checks or mainte-
nance.
Bandsaw blade tension
Bandsaw blade cleaning on
tank
Bandsaw start/stop and
brake
Height setting
Arrow for bandsaw blade
direction
Danger
To Next Page
Loading...
