To Next PageTo Next PageWhy are the headlight(s) not working on my Husqvarna TC 342?
If the headlight(s) on your Husqvarna Lawn Mower aren't working, first check if the switch is turned “ON.” If not, turn it on. If the bulb(s) or lamp(s) are burned out, replace them. A faulty light switch could also be the problem, so check and replace it if necessary. Inspect the wiring and connections for looseness or damage. Lastly, check for a blown fuse and replace it if needed.
What to do if Husqvarna TC 342 engine continues to run when operator leaves seat?
If the engine of your Husqvarna Lawn Mower continues to run when you leave the seat with the attachment clutch engaged, it indicates a faulty operator-safety presence control system. Check the wiring, switches, and connections. If the issue persists, seek assistance from an authorized service center. Do not operate the machine until the problem is resolved.
Why does my Husqvarna Lawn Mower engine dies when tractor is shifted into reverse?
If your Husqvarna Lawn Mower engine dies when shifted into reverse, it's likely because the Reverse Operation System (ROS) is not "ON" while the mower or other attachment is engaged. Turn the ignition key to the ROS "ON" position.
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Engine Name | Endurance Series V-Twin |
| Cutting Width | 42 inches |
| Transmission Type | Hydrostatic |
| Seat Material | Vinyl |
| Cruise Control | Yes |
| Cylinders | 2 |
| Fuel Type | Gasoline |
| Cutting Height, min | 1.5 inches |
| Blade Engagement | Electric |
| Seat Type | High back |
| Turning Radius | Zero-turn |
Safety precautions for children around the mower and operating it.
Key operating instructions and safety practices for general use.
Guidelines for safe operation on slopes, including angle limits and turning.
Critical safety guidelines for operating the tractor on inclines and slopes.
Step-by-step guide for draining and refilling the engine oil.
Procedures to adjust the mower deck for optimal cutting performance.
Common causes and solutions when the tractor engine fails to start.
Identifies potential causes and fixes for reduced engine power during operation.
