Need help?Do you have a question about the Husqvarna TC 85 2017 and is the answer not in the manual?
General| Engine Type | Single-cylinder, 2-stroke |
|---|---|
| Transmission | 6-speed |
| Seat Height | 860 mm |
| Starter | Kickstarter |
| Front Brake Disc Diameter | 260 mm |
| Rear Brake Disc Diameter | 220 mm |
| Final Drive | Chain |
| Displacement | 84.9 cc |
| Clutch | Wet multi-disc |
| Frame | Steel |
| Rear Suspension | WP Mono shock |
| Front Brake | Disc |
| Rear Brake | Disc |
Provides essential safety advice and instructions for operating the vehicle safely.
Explains the different degrees of risk (Danger, Warning, Caution) and their associated symbols.
Covers safe operation, including rider fitness and poisoning hazards from exhaust gases.
Emphasizes the importance of appropriate protective clothing for riders and passengers.
Highlights the necessity of proper service and tuning for optimal performance and longevity.
Describes the clutch lever, its location, and hydraulic operation.
Details the hand brake lever, its location, and engagement of the front brake.
Explains the throttle grip, its location, and function.
Describes the foot brake lever's location and use for activating the rear brake.
Essential advice for parents and new riders, focusing on readiness and safety.
Guidelines for running in the engine to ensure optimal performance and longevity.
Instructions for preparing the vehicle for challenging riding environments.
Essential checks and maintenance tasks before each ride for safety and performance.
Guidance on starting the engine, including cold start and post-storage procedures.
Details on shifting gears, riding behavior, and throttle control for efficient riding.
Explains how to apply brakes effectively, considering different conditions and potential issues.
Instructions on how to refuel the motorcycle safely, including fuel type and precautions.
Lists essential maintenance tasks and their intervals (e.g., every 10, 20, 40 operating hours).
Lists recommended maintenance tasks, including engine and chassis services.
Guides on adjusting chassis settings to match the rider's weight for optimal handling.
Explains the concept of compression damping (high-speed and low-speed) for shock absorbers.
Details how to adjust the low-speed compression damping on the shock absorber.
Provides instructions for adjusting the high-speed compression damping on the shock absorber.
Guides on how to adjust the rebound damping of the shock absorber.
Details the procedure for measuring the rear wheel sag when the motorcycle is unloaded.
Explains how to check the static sag of the shock absorber.
Details how to measure the riding sag of the shock absorber with the rider on board.
Provides instructions for adjusting the spring preload on the shock absorber.
Guides on adjusting the riding sag, which may involve spring replacement.
Explains how to check the basic setting of the front fork suspension.
Details how to adjust the compression damping on the front fork legs.
Provides instructions for adjusting the rebound damping on the front fork legs.
Details how to check for play in the steering head bearing.
Provides instructions for adjusting the play in the steering head bearing.
Procedure for removing the air filter, emphasizing importance of replacement.
Procedure for installing a clean air filter, stressing correct mounting.
Instructions for cleaning the air filter and its housing.
Instructions for cleaning the drive chain regularly.
Provides instructions for adjusting the chain tension to the correct specification.
Instructions for checking the chain, sprockets, and chain guide for wear.
Explains how to check the front brake fluid level and identify leaks.
Details on checking the minimum thickness and condition of front brake linings.
Step-by-step guide for replacing the front brake linings.
Explains how to check the rear brake fluid level and identify leaks.
Details on checking the minimum thickness and condition of rear brake linings.
Step-by-step guide for replacing the rear brake linings.
Details on checking the antifreeze concentration and coolant level.
Provides instructions for checking the coolant level in the radiator.
Explains the importance of carburetor idle settings for starting and idling.
Details on adjusting the idle speed using the idle air adjusting screw.
Details how to check the gear oil level for transmission protection.
Step-by-step instructions for changing the gear oil.
Lists torque specifications for various engine screws and nuts.
Provides tuning data for the carburetor based on altitude and temperature.
Lists torque specifications for various chassis components.
To Next Page