Husqvarna TE 250 2010 Repair Manual

E.18 Part. N. 8000 H1489 (10-2009)
GENERAL PROCEDURES
CDI electronic control unit removal
Remove: saddle and fuel tank as described in the relevant paragraphs.
Detach the connector (1) from the CDI electronic control unit (2) and take the
control unit together with its vibration mount out of the chassis.
Voltage regulator removal (TE – TXC)
- Remove the electronic control unit as described in the relevant paragraph.
- Disconnect the connector (1).

Husqvarna TE 250 2010 Specifications

General

Brand	Husqvarna
Model	TE 250 2010
Category	Motorcycle
Language	English