To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna TS 238 and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Engine Name/Type | Intek |
| Cylinders | 2 |
| Fuel Type | Gasoline |
| Transmission Type | Hydrostatic |
| Deck Material | Steel |
| Blade Engagement | Electric |
| Seat Type | High-back |
| Wheel Size | 15 inches (front) |
Understand safety instructions and proper equipment use.
Inspect and remove debris, wear proper footwear, and inspect area for objects before use.
Follow safety practices, including slope limits and hazard awareness.
Keep fasteners tight, store properly, and maintain safety features.
Use clutch/brake pedal for declutching, braking, and engine start.
Control tractor direction and speed with drive pedals.
Engage/disengage cutting unit drive using lever.
Operate ignition switch to start, run, and stop engine.
Engage and release parking brake to secure tractor.
Fuel engine properly with unleaded gasoline, observing safety precautions.
Follow procedure to start tractor engine safely.
Control tractor direction and speed with drive pedals.
Lower and engage cutting unit for mowing.
Use Reverse Operation System for safe mowing while backing up.
Properly shut down engine, ensuring attachments are disengaged.
Procedure for draining and refilling engine oil.
Verify safety systems: operator presence and reverse operation.
Maintain sharp mower blades for optimal cutting and safety.
Diagnose and resolve issues preventing engine start.
Troubleshoot starter motor failure to turn engine.
