Husqvarna Viking Automatic 21 - Table of Contents

Table Of Contents
Page
1 Adjust the machine for straight stitching
1 Timing the needle swing
2 Setting the presser bar height
3 Centering the needle in the throat plate hole
3 Setting center position for zig-zagging
3 Tangential adjustment of sewing hook
4 Setting needle bar height
4 Setting clearance between sewing hook and needle
5 Setting the feed dog height
6 Timing the feed
6 Lateral setting of the feed dog
6 Setting the thread giver
7 Setting the take up spring tension
8 Changing camshaft drive belt