Need help?Do you have a question about the Husqvarna WR 250 2013 and is the answer not in the manual?
General| Displacement | 249 cc |
|---|---|
| Bore x Stroke | 66.4 mm x 72 mm |
| Cooling System | Liquid cooled |
| Fuel System | Carburetor |
| Transmission | 6-speed |
| Final Drive | Chain |
| Front Tire | 90/90-21 |
| Rear Tire | 140/80-18 |
| Width | 820 mm |
| Height | 1, 270 mm |
| Wheelbase | 1, 480 mm |
| Engine Type | Single-cylinder, 2-stroke |
| Front Suspension | 48 mm USD forks |
| Rear Suspension | Monoshock |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Seat Height | 970 mm |
| Carburetor | Keihin PWK 36S |
Safety guidelines for parking and handling the motorcycle around children.
Specifications for the engine, including type, cooling, bore, stroke, and displacement.
Details on the carburetor, jets, and other fuel system components.
Technical specifications for the front fork, including type and dimensions.
Technical specifications for the rear shock absorber.
Specifications for the front brake system, including disc size and type.
Specifications for the rear brake system, including disc size and type.
Pre-ride inspection checklist to ensure safety and prevent failures.
Procedures for breaking in the engine to ensure optimal performance and durability.
Critical warnings related to engine starting, exhaust fumes, and kickback.
Adjusting the compression damping on the lower fork register.
Adjusting the extension damping on the upper fork register.
How to inspect brake pads for wear and the service limit.
To Next Page