SERVICE AND ADJUSTMENTS
Disengage belt tension rod (K) from locking bracket
(L).
Install belt onto engine clutch pulley (M),
IMPORTANT: Check belt for proper routing in all mower
pulley grooves,
FIG. 23
Engage beit tension rod (K) on locking bracket (L),
CAUTION: Belt tension rod is spring
loaded. Have a tight grip on rod and
engage slowly.
Raise attachment lift lever to highest position,
If necessary, adjust gauge wheels before operating
mower as shown in the Operation section of this
manual.
FIG. 24
2O
To Next Page
Loading...
