Figure 4-19
BBuusshhiinngg
HHeeiigghhtt
aaddjjuussttiinngg
ppiinn
Figure 4-18
Bushing
Height
adjusting
pin
Figure 4-15
Resharpening Pattern
Do not sharpen to original pattern (below).
It is easier to get a straight cutting edge following
the resharpening pattern shown above.
Original Edge
Warped Blade (Replace)
Straight Blade
Comparison of Warped and Straight Blades
Cutting
Plane
Figure 4-16
Figure 4-17
Twisted Blade Edge
(Replace)
Cutting Edge
Straight Blade Edge
End view of blades, comparing
twisted and straighten blades.
Cutting Plane
Cutting Edge
778845 Rev. 7/04
4-9
To Next Page
Loading...
