6-2 111251_1109
TRIMSTAR 36/48 Technical Specifications
Sound Measurements (dBA):
Sound Power per
Hemisphere method
(ISO 3744 - 1994 & 11094 - 1991)
Guaranteed Sound Power Level
929232CE – 100 dBA
929240CE – 105dBA
929257CE – 105 dBA
Operator Ear
929232CE – 84 dBA
929240CE – 89 dBA
929257CE – 89.1 dBA
Engine RPM
929232CE – 2650 (± 50) RPM's
929240CE – 2750 (± 50) RPM's
929257CE – 2950 (± 50) RPM's
Vibration:
(Maximum weighted acceleration m/s2 - whole body)
929232CE – 1.26 m/s²
929240CE – 1.52 m/s²
929257CE – 1.45 m/s²
Whole body - The RMS acceleration in m/s² measured on 3 minutes on a representative machine. The acceleration value depends
upon the roughness of the ground, the speed at which the tractor is operating and the operator driving habits. Measurements were
obtained thru actual field data according to STD Procedure in ISO 2631-1-1997.
Hand/Arm -
929232CE – The RMS acceleration in m/s² measured in one minute is less than 2.5 m/s². These values were obtained
through hand/arm measure per ISO 5349-1-2001.
929240CE – The RMS acceleration in m/s² measured in one minute is equal to 3.4 m/s². These values were obtained through
hand/arm measure per ISO 5349-1-2001.
929257CE – The RMS acceleration in m/s² measured in one minutes is equal to 2.7 m/s². These values were obtained
through hand/arm measure per ISO 5349-1-2001.
Test was performed on a static (stationary) machine.
To Next Page
Loading...
