Need help?Do you have a question about the Huvitz HDR-9000 and is the answer not in the manual?
Configure essential system parameters like language and chart settings.
Utilize Engineer Mode for advanced diagnostics and maintenance checks.
Perform checks including initialization, self-execution, and visual inspection.
Execute tests for PD, convergence, initialization, and auxiliary lenses.
Procedure to safely replace the main circuit board of the refractor.
Instructions for replacing PI and HALL sensors in the refractor body.
Configure essential system parameters like language and chart settings.
Utilize Engineer Mode for advanced diagnostics and maintenance checks.
Perform checks including initialization, self-execution, and visual inspection.
Execute tests for PD, convergence, initialization, and auxiliary lenses.
Procedure to safely replace the main circuit board of the refractor.
Instructions for replacing PI and HALL sensors in the refractor body.
General| Type | Digital Refractor |
|---|---|
| Cross Cylinder | ±0.25D, ±0.50D |
| Communication | RS-232C, USB |
| Increments | 0.01D/0.12D/0.25D |
| Power Supply | AC 100-240V, 50/60Hz |
| Phoropter Type | Motorized |
| Cylinder Axis | 1° to 180° |
| Axis | 1° to 180° |
| PD Adjustment | 48 mm to 80 mm |
| Prism Range | 0 ~ 20Δ |
| Display | LCD |
To Next Page
