DMX 512 CONTROLLER SERIES
3.4.9 DELETE ALL CHASE PROGRAMS3.4.9 DELETE ALL CHASE PROGRAMS
Action :Action :
2)
Press the desired button.CHASE
1 PROGRAM) Press and hold the button to enter
programming mode.
Notes :Notes :
I.e. To insert a scene between Steps 05 and 06
navigate using BANK buttons until the display reads
STEP05.
Action :Action :
2)
Press and hold the button and the
button while turning ON the controller.
BANK DOWN
AUTO DEL
1)
Turn OFF controller.
3) All LEDs will blink.
Notes :Notes :
3.5 Scene Programming (Steps)3.5 Scene Programming (Steps)
Action :Action :
2) Select the that contains the scene to be
copied using the buttons.
BANK
BANK UP/DOWN
1 PROGRAM) Press and hold the button to enter
programming mode.
3) Press the button that corresponds
to the scene to be copied.
SCENE
Notes :Notes :
3.5.2 COPY A SCENE3.5.2 COPY A SCENE
5)
Select the destination that contains the scene
memory to record onto using the
buttons.
BANK
BANK UP/DOWN
3)
Press the to switch the LED
display to steps view.
TAPSYNC DISPLAY
4)
Use the buttons to navigate steps
and locate the insert point of the new scene.
The display will read the step number.
BANK UP/DOWN
5)
Press button to prepare the insert.MIDI/ADD
6) Use the button to locate the .BANK UP/DOWN SCENE
7)
Press the button that corresponds to the scene
to be inserted.
SCENE
8)
Press button to insert the scene. All LEDs
will blink.
MIDI/ADD
4) Press button to copy the scene.MIDI/ADD
CAUTION! This procedure will result in irrevocable loss of chase step memory. The individual scenes
and program banks will be preserved.
3.5.1 INSERT A SCENE3.5.1 INSERT A SCENE
6)
Press the desired button to complete copy.
All LEDs will blink.
SCENE
USER MANUAL
13/18
To Next Page
Loading...
Need help?
General