Hydac EDS 3000 Operating Instructions

18 EDS 3000
Status: 2021-10-08 HYDAC ELECTRONIC GMBH Part no.: 669851
13 Program enable
13.1 General
The unit has 2 programming enables which both have to be enabled in order to modify
the settings. The operating programming enable can be set or cancelled during
operation. It provides protection against unintentional alterations of settings. A
programming disable via the main programming enable prevents any changes from
being made to the settings during operation. This serves as a safety function or as
protection against unauthorised alterations for example.
13.2 Changing the Programming Enable
13.3 Changing the main programming enable
Switch off the supply voltage or disconnect the instrument from the supply voltage.
Note:
Whenever any settings have been altered, "PRoG" appears briefly in the display
when switching over.
The new setting is then saved in the unit.

Hydac EDS 3000 Specifications

General

Brand	Hydac
Model	EDS 3000
Category	Switch
Language	English