27
ENGLISH
10 | Troubleshooting
PROBLEM POSSIBLE CAUSE SOLUTION
You have no
feeling of
stimulus.
Are the batteries
exhausted?
Replace the batteries.
Are the batteries
properly loaded?
Correctly load the
batteries.
Is the wire properly
connected?
Firmly connect the wire.
Have you removed the
transparent protection
lm over the electrode
pad?
Remove the transparent
protection lm over the
electrode pad.
Stimulus is weak. Do the electrode pads
rmly stick to the skin?
Firmly stick the electrode
pad to the skin.
Are the electrode pads
overlapped?
Separate the electrode
pad and stick them to the
skin gain.
Are the electrode pads
dirty?
Please clean the electrode
pad.
Is intensity too weak? Turn the intensity regulati-
on dial to regulate it.
Are the electrode pads
properly positioned?
Change the position of
the electrode pad.
The skin
becomes red.
Is the therapeutic time
too long?
Control it within 10-15
minutes a time.
Do the electrode pads
rmly stick to the skin?
Please rmly stick the
electrode pad to the skin.
Are the electrode pads
too dry?
Please gently wipe them
up with wet cloth and
then use them again.
08428_DE-GB-FR-NL_V2.indd 2728_DE-GB-FR-NL_V2.indd 27 19.12.2013 10:18:5019.12.2013 10:18:50
To Next Page
Loading...