EasyManua.ls Logo

Hydas AD-2021 - 9 | Setup and operating procedures

Hydas AD-2021
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
ENGLISH
damage to the STIMULATOR.
• Operation in close proximity (e.g. 1 m) to a shortwave or microwave
therapy EQUIPMENT may produce instability in the STIMULATOR output.
• Application of electrodes near the thorax may increase the risk of cardiac
brillation.
• Please do not drop, repair, or rebuild it privately.
• Please do not use electrode pads other than those supplied by the ma-
nufacturer, otherwise it may bring biocompatible hazard and may result
in errors.
• Please do not share the electrode pads with infective persons to avoid
cross-infection.
9 | Setup and operating procedures
1. Battery loading
a Open battery cover at the back of the device.
b Load two „AAA“ size batteries. Please pay attention to polarity.
c Close the battery cover.
- Rechargeable batteries are not suitable for this device.
- Remove the batteries if the monitor will not be used for a month
or more to avoid relevant damage of battery leakage.
- Please do not mix use new and old batteries or di erent type of batteries.
- Please do not throw battery into  re.
Disposal of appliances and batteries
The device and the batteries, must be disposed of according to local re-
gulations at the end of their usage.
2. Attachment of electrode lead wires
a Insert the plug into the electrode socket on the main apparatus.
b Connect the snap-fasteners at the other end of the wire to the
electrode pads.
c Place the electrode on your body as directed by your physician.
- Clean the wires by wiping with a damp cloth.
- Coating them lightly with talcum powder will reduce tangling and
prolong life.
08428_DE-GB-FR-NL_V2.indd 2428_DE-GB-FR-NL_V2.indd 24 19.12.2013 10:18:4919.12.2013 10:18:49