Need help?Do you have a question about the Hydrofarm Autopilot APCEMDL and is the answer not in the manual?
General| Model | APCEMDL |
|---|---|
| Category | Measuring Instruments |
| Manufacturer | Hydrofarm |
| Product Line | Autopilot |
| Temperature Range | 32°F to 122°F (0°C to 50°C) |
| Humidity Range | 0 to 99% RH |
| Monitors | CO2, Temperature, Humidity |
| Datalogging | Yes |
| CO2 Range | 0 to 5000 ppm |
| Product Type | Controller |
| Power Supply | 120V AC |
Shows CO₂, temperature, RH, and max/min readings.
Displays SD card, alarm, and date/time status.
Shows main menu and zoom level status.
Steps for initial device setup and power connection.
How the device logs data to microSD and how to export it.
Configure audible and visual CO₂ alarms.
Set the device's current date and time.
Access and review historical logged data.
Calibrate the CO₂ sensor using ambient air.
Apply altitude adjustment for CO₂ accuracy.
Switch temperature display between Celsius and Fahrenheit.
Adjust alarms, lights, and restore factory settings.
Adjust the time span displayed on the trend chart.
Shows maximum and minimum values on the chart.
Adjust the device's date and time settings.
To Next Page
