Hydrofarm Autopilot PX2 - Cable Guide: PHANTOM HID Fixtures; RJ Data Link Cable Setup; HID Fixture Connection Legend

Hydrofarm.com 10
CABLE GUIDE
Advanced Digital & Analog Lighting Controller
(APDPX2)
Fixtures are not shown to scale.
IMPORTANT: Do not attach data link cables to AC power cable. Always keep low voltage data cables and high voltage AC power harness as far as possible from each other for stable signal transmission. Avoid coiling data cables as well as AC harnesses in tight coils. Excess cable should be managed by creating long loops as opposed to tight coils.
RJ Data
Link Cable
RJ12
T-Connector
RJ12 to USB
RJ Data Link Cable RJ12 T-Connector RJ12 to RJ12 RJ12 to USB
LEGEND: HPS, MH & CMH
ZONE A Controls up to 256 HID fixtures. ZONE B Controls up to 256 HID fixtures.
PHANTOM with USB
HID Fixtures
Note: Zone A and Zone B can be set up in one room, or in two separate rooms.