3
• Starting at the foot end of the unit, re-
move the 2 screws as shown at each
corner of the base panels. Remove
the head and foot panels,
• NOTE: Be sure the front base panel
with the lter is reinstalled on the
front when reassembling.
• Remove the 2 side base panels as
shown.
• NOTE: Be sure when reinstalling side
panels, the slots are curving up going to-
wards the foot end.
Step
1.6
Step
1.7
IMPORTANT: Place all panels and
thumb screws in secure location dur-
ing this process. Panels Finished side
up.
To Next Page
Loading...