5
The following instructions explain how to safely move and setup your HydroMassage® unit.
CAUTION
• Use two people when moving unit, use caution not to
scratch or marr the ooring.
• Move and position the HydroMassage® unit
in the desired location and remove from dolly.
Step
2.1
Step
2.2
Step
2.3
• Before adding water, be sure to check
that the 2 pump unions are tight by turn-
ing clockwise by hand (Do not use a
wrench). Also check and be sure all 32
at bar knobs around the top edge of
lounge are securely tightened.
• Located and detach the ll
spout from the ll port and
remove ll cap.Thread the ll
spout into the port, add the
Water Treatment and 12 gal-
2.0 Move Unit & Setup
Pump
Unions
Knobs
To Next Page
