8
• Reinstall both side panels by lining the
panel cutouts with the at bar knobs and
apply pressure inward to engage panel
locks on at bar knobs.
• Install foot panel by lining the knobs with the
panel cutouts.
*Pro Tip: Holding the foot panel
in place, loosely attach with top panel
screws into the clipsto keep panels in
place, repeat step for opposite side pan-
els Securely fasten all 4 screws once all
panels are in place.
Step
3.5
Step
3.6
IMPORTANT: Be sure the front base
panel with the lter is reinstalled on the front
when reassembling..
• Reinstall the foot end base panel and
secure with 2 screws as shown at
each foot corner of the base panels.
Step
3.7
To Next Page
