HYLA EST - HYLA EST NIMBUS WET CLEANING SYSTEM COMPONENTS; PREPARATION FOR USE

1
3
9
6
2
1
3
4
5
7 8
2
1. NIMBUS Fresh-Water Tank
2. Flexible Water Hose EST
with valve
3. Hard Floor Nozzle
4. Carpet Nozzle
5. Upholstery Nozzle
6. Spray Nozzle
7. HYLA Cleanser for hard floors (500 ml)
8. HYLA Cleanser for carpeted floors and
upholstery (500 ml)
9. Hard Water Tube EST (2 pcs.)
• Fill the NIMBUS Fresh-Water Tank with max.
3,5 l of water (max 40°C).
• Add 20 to 40 ml (2–4 capfuls) of original HYLA cleanser.
• Fill HYLA Water Pan with approximately 1 litre of water.
• Remove the HYLA exhaust grid and mount the NIMBUS
Fresh-Water Tank onto the Motor Unit Assembly.
• Connect the NIMBUS Hose to the Motor Unit Assembly
and connect the integrated Fresh-Water Tube to the
NIMBUS Fresh-Water Tank Valve.
PREPARATION
FOR USE
HYLA EST NIMBUS
WET CLEANING SYSTEM
COMPONENTS
HYLA EST NIMBUS WET CLEANING SYSTEM44 / 45